2N Access Unit 2.0 Fingerprint Reader (916031)
- Category:2N Access Unit,2N SIP Door Entry System,ALL PRODUCTS,Best selling products,New products,SIP Door Entry System
2N Access Unit 2.0 Fingerprint Reader (916031)
The 2N Access Unit 2.0 Fingerprint Reader is an IP access control unit equipped with fingerprint reader. Thanks to its optical sensor, it provides maximum security, high reliability, and rapid fingerprint reading response. It works on indoor and outdoor installations under any weather conditions.
2N Access Unit 2.0 Fingerprint Reader Key Features
- Reliable optical technology
- Innovative and functional design
- False fingerprint detection
- Weather resistant sensor
- Spoof fingerprint detection
- Simple installation
- Remote configuration
- Tamper protection
- Web interface administration
Interface
- Power supply: PoE and/or 12V/1A DC
- PoE: 802.3af (Class 0–12.95W)
- LAN: 10/100BASE-TX with Auto-MDIX, connecting block or RJ-45 pigtail
- Recommended cabling: Cat-5e or higher
- Supported protocols: DHCP opt. 66, SMTP, 802.1x, TFTP, HTTP, HTTPS, Syslog
- Passive switch: NO/NC contact, up to 30 V / 1 A AC/DC
- Active switch output: 8 to 12 V DC according to power supply (PoE: 10 V; adapter: source voltage minus 2 V), up to 550 mA
- Tamper switch is part of the 2N Access Unit
- Inputs: Passive / active mode (-30 V to +30 V DC)
Fingerprint reader
- Sensor: Optical sensor protected by resistant glass
- Reliability: Algorithm for fake fingerprint detection
- Resistance: Resistant to water and dust
- Ambient light suppression: Also works in direct sunlight
- Signalling: Acoustic and multicoloured LEDs
- Sensing area: Large with dimensions of 15.24 x 20.32 mm
- Certification: certified according to FBI standard
Mechanical properties
- Cover: Robust zinc cast with surface finish
- Operating temperature: -40°C to 60°C
- Storage temperature: -40°C to 70°C
- Operating relative humidity: 10%-95% (non-condensing)
- Dimensions:
- Wall (surface) mounting frame 1 module: 107 (W) x 130 (H) x 28 (D) mm
- Flush mounting frame 1 module: 130 (W) x 153 (H) x 5 (D) mm
- Flush mounting box (minimum hole dimensions) 1 module: 108 (W) x 131 (H) x 45 (D) mm - Weight: max 0.8kg
- Cover: rating IP54 and IK08
2N Access Unit 2.0 Fingerprint Reader (916031)
The 2N Access Unit 2.0 Fingerprint Reader is an IP access control unit equipped with fingerprint reader. Thanks to its optical sensor, it provides maximum security, high reliability, and rapid fingerprint reading response. It works on indoor and outdoor installations under any weather conditions.
2N Access Unit 2.0 Fingerprint Reader Key Features
- Reliable optical technology
- Innovative and functional design
- False fingerprint detection
- Weather resistant sensor
- Spoof fingerprint detection
- Simple installation
- Remote configuration
- Tamper protection
- Web interface administration
Interface
- Power supply: PoE and/or 12V/1A DC
- PoE: 802.3af (Class 0–12.95W)
- LAN: 10/100BASE-TX with Auto-MDIX, connecting block or RJ-45 pigtail
- Recommended cabling: Cat-5e or higher
- Supported protocols: DHCP opt. 66, SMTP, 802.1x, TFTP, HTTP, HTTPS, Syslog
- Passive switch: NO/NC contact, up to 30 V / 1 A AC/DC
- Active switch output: 8 to 12 V DC according to power supply (PoE: 10 V; adapter: source voltage minus 2 V), up to 550 mA
- Tamper switch is part of the 2N Access Unit
- Inputs: Passive / active mode (-30 V to +30 V DC)
Fingerprint reader
- Sensor: Optical sensor protected by resistant glass
- Reliability: Algorithm for fake fingerprint detection
- Resistance: Resistant to water and dust
- Ambient light suppression: Also works in direct sunlight
- Signalling: Acoustic and multicoloured LEDs
- Sensing area: Large with dimensions of 15.24 x 20.32 mm
- Certification: certified according to FBI standard
Mechanical properties
- Cover: Robust zinc cast with surface finish
- Operating temperature: -40°C to 60°C
- Storage temperature: -40°C to 70°C
- Operating relative humidity: 10%-95% (non-condensing)
- Dimensions:
- Wall (surface) mounting frame 1 module: 107 (W) x 130 (H) x 28 (D) mm
- Flush mounting frame 1 module: 130 (W) x 153 (H) x 5 (D) mm
- Flush mounting box (minimum hole dimensions) 1 module: 108 (W) x 131 (H) x 45 (D) mm - Weight: max 0.8kg
- Cover: rating IP54 and IK08
Understanding Our Returns and Refunds Policy
Easy Returns for Your Convenience
At our company, we believe that shopping should be hassle-free. This is why we have made our returns and refunds process as easy as possible. If you receive a product that doesn’t meet your expectations or is defective, you can return it within 30 days for a full refund. Our team is always here to assist you, so you don’t have to worry about complicated steps when returning an item.
Refund Process Made Simple
Once we receive your returned item, we initiate the refund process immediately. Typically, refunds are processed within 5-7 business days. However, there might be variations due to your bank's policies. We understand that getting your money back promptly is essential, which is why we prioritize quick refunds. Because of this efficiency, customers can trust that their satisfaction is our highest priority.
Customer Support for Returns and Refunds
If you have questions about our returns and refunds, our customer support team is always ready to help. You can reach out via email or phone for assistance with your return. We want you to feel confident when making a purchase, and knowing that we value customer support makes the process smoother. So, don’t hesitate to contact us if you need clarification or help!
