Ubiquiti UniFi AC In-Wall Access Point (UAP-AC-IW)
![Ubiquiti UniFi AC In-Wall Access Point (UAP-AC-IW) Ubiquiti VoIP Supplies]()
![Ubiquiti UniFi AC In-Wall Access Point (UAP-AC-IW) Ubiquiti VoIP Supplies]()
Ubiquiti UniFi AC In-Wall Access Point (UAP-AC-IW)
Available:In Stock
£86.40
Ubiquiti UniFi AC In-Wall Access Point (UAP-AC-IW)
The Ubiquiti UAP-AC-IW is a dual-band 802.11AC WiFi Access Point powered from an Ethernet wall connection. It features two Gigabit Ethernet ports, one of which delivers PoE to power and connect an 802.3af device to the network.
Ubiquiti UniFi UAP-AC-IW Key Features
802.3at PoE+
3x 10/100/1000 Ethernet Ports
2.4GHz radio rate 300 Mbps
5GHz radio rate 867 Mbps
Dual-band 802.11ac
The Ubiquiti UniFi UAP-AC-IW provides simultaneous, dual-band, 2x2 MIMO technology and is available in single and five packs (PoE adapters not included).
Easier Than You Think
Ideal for new and retrofit installations, the UniFi® AC In-Wall is designed to convert an Ethernet wall jack into a dual-band 802.11ac Wi-Fi access point with two Gigabit Ethernet ports.
UAP-AC-IW
The Power of PoE
Turn existing wiring into per-room Wi-Fi with the UniFi PoE Switch series. (Requires Cat5e or higher)
PoE
UAP-AC-IW
Versatile Data and PoE Output
An Ethernet wall jack becomes an access point, a gigabit switch, and a PoE power source.
Wire a workstation and power a VoIP phone. Or power a US-8 for even more Ethernet ports.
Versatile Data and PoE Output
Ubiquiti UniFi UAP-AC-IW In Wall Access Point deployment example
Ubiquiti UniFi UAP-AC-IW Technical Specification
General
Dimensions: 139.7 x 86.7 x 25.75 mm (5.5 x 3.41 x 1.01")
Weight: 200 g (6.43 oz)
Networking Interface: (3) 10/100/1000 Ethernet Ports
Buttons: Reset
Power Method: 802.3at PoE+ Supported
Power Supply: UniFi PoE Switch (Not Included)
Power Save: Supported
PoE Out: 48V Pass-Through (Pins 1, 2+; 3, 6-)
Maximum Power Consumption: 7W
Maximum Power Consumption with PoE Passthrough: 19W*
Maximum TX Power:
- 2.4 GHz: 20 dBm
- 5 GHz: 20 dBm
Antennas:
- (1) Dual-Band Antenna, Single-Polarity
- 2.4 GHz: 1 dBi
- 5 GHz: 2 dBi
WiFi Standards: 802.11 a/b/g/n/r/k/v/ac
Wireless Security: WEP, WPA-PSK, WPA-Enterprise (WPA/WPA2, TKIP/AES)
BSSID: Up to 8 per Radio
Mounting: 1-Gang Electrical Wall Box (Not Included)
Operating Temperature: -10 to 50° C (14 to 122° F)
Operating Humidity: 5 to 95% Noncondensing
Certifications: CE, FCC, IC
* Requires 802.3at PoE+ switch
Advanced Traffic Management
VLAN: 802.1Q
Advanced QoS: Per-User Rate Limiting
Guest Traffic Isolation: Supported
WMM: Voice, Video, Best Effort, and Background
Concurrent Clients: 250+
Supported Data Rates (Mbps)
Standard: Data Rates
802.11ac: 6.5 Mbps to 867 Mbps (MCS0 - MCS9 NSS1/2, VHT 20/40/80)
802.11n: 6.5 Mbps to 300 Mbps (MCS0 - MCS15, HT 20/40)
802.11a: 6, 9, 12, 18, 24, 36, 48, 54 Mbps
802.11g: 6, 9, 12, 18, 24, 36, 48, 54 Mbps
802.11b: 1, 2, 5.5, 11 Mbps
The Ubiquiti UAP-AC-IW is a dual-band 802.11AC WiFi Access Point powered from an Ethernet wall connection. It features two Gigabit Ethernet ports, one of which delivers PoE to power and connect an 802.3af device to the network.
Ubiquiti UniFi UAP-AC-IW Key Features
802.3at PoE+
3x 10/100/1000 Ethernet Ports
2.4GHz radio rate 300 Mbps
5GHz radio rate 867 Mbps
Dual-band 802.11ac
The Ubiquiti UniFi UAP-AC-IW provides simultaneous, dual-band, 2x2 MIMO technology and is available in single and five packs (PoE adapters not included).
Easier Than You Think
Ideal for new and retrofit installations, the UniFi® AC In-Wall is designed to convert an Ethernet wall jack into a dual-band 802.11ac Wi-Fi access point with two Gigabit Ethernet ports.
UAP-AC-IW
The Power of PoE
Turn existing wiring into per-room Wi-Fi with the UniFi PoE Switch series. (Requires Cat5e or higher)
PoE
UAP-AC-IW
Versatile Data and PoE Output
An Ethernet wall jack becomes an access point, a gigabit switch, and a PoE power source.
Wire a workstation and power a VoIP phone. Or power a US-8 for even more Ethernet ports.
Versatile Data and PoE Output
Ubiquiti UniFi UAP-AC-IW In Wall Access Point deployment example
Ubiquiti UniFi UAP-AC-IW Technical Specification
General
Dimensions: 139.7 x 86.7 x 25.75 mm (5.5 x 3.41 x 1.01")
Weight: 200 g (6.43 oz)
Networking Interface: (3) 10/100/1000 Ethernet Ports
Buttons: Reset
Power Method: 802.3at PoE+ Supported
Power Supply: UniFi PoE Switch (Not Included)
Power Save: Supported
PoE Out: 48V Pass-Through (Pins 1, 2+; 3, 6-)
Maximum Power Consumption: 7W
Maximum Power Consumption with PoE Passthrough: 19W*
Maximum TX Power:
- 2.4 GHz: 20 dBm
- 5 GHz: 20 dBm
Antennas:
- (1) Dual-Band Antenna, Single-Polarity
- 2.4 GHz: 1 dBi
- 5 GHz: 2 dBi
WiFi Standards: 802.11 a/b/g/n/r/k/v/ac
Wireless Security: WEP, WPA-PSK, WPA-Enterprise (WPA/WPA2, TKIP/AES)
BSSID: Up to 8 per Radio
Mounting: 1-Gang Electrical Wall Box (Not Included)
Operating Temperature: -10 to 50° C (14 to 122° F)
Operating Humidity: 5 to 95% Noncondensing
Certifications: CE, FCC, IC
* Requires 802.3at PoE+ switch
Advanced Traffic Management
VLAN: 802.1Q
Advanced QoS: Per-User Rate Limiting
Guest Traffic Isolation: Supported
WMM: Voice, Video, Best Effort, and Background
Concurrent Clients: 250+
Supported Data Rates (Mbps)
Standard: Data Rates
802.11ac: 6.5 Mbps to 867 Mbps (MCS0 - MCS9 NSS1/2, VHT 20/40/80)
802.11n: 6.5 Mbps to 300 Mbps (MCS0 - MCS15, HT 20/40)
802.11a: 6, 9, 12, 18, 24, 36, 48, 54 Mbps
802.11g: 6, 9, 12, 18, 24, 36, 48, 54 Mbps
802.11b: 1, 2, 5.5, 11 Mbps
Ubiquiti UniFi AC In-Wall Access Point (UAP-AC-IW)
The Ubiquiti UAP-AC-IW is a dual-band 802.11AC WiFi Access Point powered from an Ethernet wall connection. It features two Gigabit Ethernet ports, one of which delivers PoE to power and connect an 802.3af device to the network.
Ubiquiti UniFi UAP-AC-IW Key Features
802.3at PoE+
3x 10/100/1000 Ethernet Ports
2.4GHz radio rate 300 Mbps
5GHz radio rate 867 Mbps
Dual-band 802.11ac
The Ubiquiti UniFi UAP-AC-IW provides simultaneous, dual-band, 2x2 MIMO technology and is available in single and five packs (PoE adapters not included).
Easier Than You Think
Ideal for new and retrofit installations, the UniFi® AC In-Wall is designed to convert an Ethernet wall jack into a dual-band 802.11ac Wi-Fi access point with two Gigabit Ethernet ports.
UAP-AC-IW
The Power of PoE
Turn existing wiring into per-room Wi-Fi with the UniFi PoE Switch series. (Requires Cat5e or higher)
PoE
UAP-AC-IW
Versatile Data and PoE Output
An Ethernet wall jack becomes an access point, a gigabit switch, and a PoE power source.
Wire a workstation and power a VoIP phone. Or power a US-8 for even more Ethernet ports.
Versatile Data and PoE Output
Ubiquiti UniFi UAP-AC-IW In Wall Access Point deployment example
Ubiquiti UniFi UAP-AC-IW Technical Specification
General
Dimensions: 139.7 x 86.7 x 25.75 mm (5.5 x 3.41 x 1.01")
Weight: 200 g (6.43 oz)
Networking Interface: (3) 10/100/1000 Ethernet Ports
Buttons: Reset
Power Method: 802.3at PoE+ Supported
Power Supply: UniFi PoE Switch (Not Included)
Power Save: Supported
PoE Out: 48V Pass-Through (Pins 1, 2+; 3, 6-)
Maximum Power Consumption: 7W
Maximum Power Consumption with PoE Passthrough: 19W*
Maximum TX Power:
- 2.4 GHz: 20 dBm
- 5 GHz: 20 dBm
Antennas:
- (1) Dual-Band Antenna, Single-Polarity
- 2.4 GHz: 1 dBi
- 5 GHz: 2 dBi
WiFi Standards: 802.11 a/b/g/n/r/k/v/ac
Wireless Security: WEP, WPA-PSK, WPA-Enterprise (WPA/WPA2, TKIP/AES)
BSSID: Up to 8 per Radio
Mounting: 1-Gang Electrical Wall Box (Not Included)
Operating Temperature: -10 to 50° C (14 to 122° F)
Operating Humidity: 5 to 95% Noncondensing
Certifications: CE, FCC, IC
* Requires 802.3at PoE+ switch
Advanced Traffic Management
VLAN: 802.1Q
Advanced QoS: Per-User Rate Limiting
Guest Traffic Isolation: Supported
WMM: Voice, Video, Best Effort, and Background
Concurrent Clients: 250+
Supported Data Rates (Mbps)
Standard: Data Rates
802.11ac: 6.5 Mbps to 867 Mbps (MCS0 - MCS9 NSS1/2, VHT 20/40/80)
802.11n: 6.5 Mbps to 300 Mbps (MCS0 - MCS15, HT 20/40)
802.11a: 6, 9, 12, 18, 24, 36, 48, 54 Mbps
802.11g: 6, 9, 12, 18, 24, 36, 48, 54 Mbps
802.11b: 1, 2, 5.5, 11 Mbps
The Ubiquiti UAP-AC-IW is a dual-band 802.11AC WiFi Access Point powered from an Ethernet wall connection. It features two Gigabit Ethernet ports, one of which delivers PoE to power and connect an 802.3af device to the network.
Ubiquiti UniFi UAP-AC-IW Key Features
802.3at PoE+
3x 10/100/1000 Ethernet Ports
2.4GHz radio rate 300 Mbps
5GHz radio rate 867 Mbps
Dual-band 802.11ac
The Ubiquiti UniFi UAP-AC-IW provides simultaneous, dual-band, 2x2 MIMO technology and is available in single and five packs (PoE adapters not included).
Easier Than You Think
Ideal for new and retrofit installations, the UniFi® AC In-Wall is designed to convert an Ethernet wall jack into a dual-band 802.11ac Wi-Fi access point with two Gigabit Ethernet ports.
UAP-AC-IW
The Power of PoE
Turn existing wiring into per-room Wi-Fi with the UniFi PoE Switch series. (Requires Cat5e or higher)
PoE
UAP-AC-IW
Versatile Data and PoE Output
An Ethernet wall jack becomes an access point, a gigabit switch, and a PoE power source.
Wire a workstation and power a VoIP phone. Or power a US-8 for even more Ethernet ports.
Versatile Data and PoE Output
Ubiquiti UniFi UAP-AC-IW In Wall Access Point deployment example
Ubiquiti UniFi UAP-AC-IW Technical Specification
General
Dimensions: 139.7 x 86.7 x 25.75 mm (5.5 x 3.41 x 1.01")
Weight: 200 g (6.43 oz)
Networking Interface: (3) 10/100/1000 Ethernet Ports
Buttons: Reset
Power Method: 802.3at PoE+ Supported
Power Supply: UniFi PoE Switch (Not Included)
Power Save: Supported
PoE Out: 48V Pass-Through (Pins 1, 2+; 3, 6-)
Maximum Power Consumption: 7W
Maximum Power Consumption with PoE Passthrough: 19W*
Maximum TX Power:
- 2.4 GHz: 20 dBm
- 5 GHz: 20 dBm
Antennas:
- (1) Dual-Band Antenna, Single-Polarity
- 2.4 GHz: 1 dBi
- 5 GHz: 2 dBi
WiFi Standards: 802.11 a/b/g/n/r/k/v/ac
Wireless Security: WEP, WPA-PSK, WPA-Enterprise (WPA/WPA2, TKIP/AES)
BSSID: Up to 8 per Radio
Mounting: 1-Gang Electrical Wall Box (Not Included)
Operating Temperature: -10 to 50° C (14 to 122° F)
Operating Humidity: 5 to 95% Noncondensing
Certifications: CE, FCC, IC
* Requires 802.3at PoE+ switch
Advanced Traffic Management
VLAN: 802.1Q
Advanced QoS: Per-User Rate Limiting
Guest Traffic Isolation: Supported
WMM: Voice, Video, Best Effort, and Background
Concurrent Clients: 250+
Supported Data Rates (Mbps)
Standard: Data Rates
802.11ac: 6.5 Mbps to 867 Mbps (MCS0 - MCS9 NSS1/2, VHT 20/40/80)
802.11n: 6.5 Mbps to 300 Mbps (MCS0 - MCS15, HT 20/40)
802.11a: 6, 9, 12, 18, 24, 36, 48, 54 Mbps
802.11g: 6, 9, 12, 18, 24, 36, 48, 54 Mbps
802.11b: 1, 2, 5.5, 11 Mbps
Understanding Our Returns and Refunds Policy
Easy Returns for Your Convenience
At our company, we believe that shopping should be hassle-free. This is why we have made our returns and refunds process as easy as possible. If you receive a product that doesn’t meet your expectations or is defective, you can return it within 30 days for a full refund. Our team is always here to assist you, so you don’t have to worry about complicated steps when returning an item.
Refund Process Made Simple
Once we receive your returned item, we initiate the refund process immediately. Typically, refunds are processed within 5-7 business days. However, there might be variations due to your bank's policies. We understand that getting your money back promptly is essential, which is why we prioritize quick refunds. Because of this efficiency, customers can trust that their satisfaction is our highest priority.
Customer Support for Returns and Refunds
If you have questions about our returns and refunds, our customer support team is always ready to help. You can reach out via email or phone for assistance with your return. We want you to feel confident when making a purchase, and knowing that we value customer support makes the process smoother. So, don’t hesitate to contact us if you need clarification or help!
