Ubiquiti UniFi AP FlexHD Indoor / Outdoor Access Point (UAP-FlexHD)

Available:In Stock

Category:ALL PRODUCTS,Best selling products,Intel: Revolutionizing Computing Technology,New products,Ubiquiti,Ubiquiti UniFi Access Points

£160.08

Ubiquiti UniFi FlexHD Indoor/Outdoor WiFi Access Point (UAP-FlexHD)
The UniFi FlexHD Access point has a small, sleek design and compact form factor that can easily be deployed indoors or outdoors. With flexible mounting options, the Flex HD can be deployed on tabletops, walls, poles, and ceilings.

Ubiquiti UAP-FlexHD Key Features

4x4 MU-MIMO Technology with 1.733 Gbps Throughput
Weatherproof for Indoor / Outdoor Installations
Flexible Mounting Options for Ceiling, Pole, Tabletop, or Wall
802.11ac Technology
High-Density Scenarios
10/100/1000 Ethernet Port
UniFi

Save Money and Save Time
UniFi comes bundled with a nondedicated software controller that can be deployed on an on-site PC, Mac, or Linux machine; in a private cloud; or using a public cloud service. You also have the option of deploying the compact UniFi Cloud Key with built-in software.

Powerful Hardware
The UniFi AP Flex HD features 802.11ac Wave 2 MU-MIMO technology.

Intuitive UniFi Controller Software
Configure and manage your APs with the easy-to-learn user interface.

Expandable
Unlimited scalability: build wireless networks as big or small as needed. Start with one (or upgrade to a three-pack) and expand to hundreds while maintaining a single unified management system.

Application Diagram

802.11ac Technology
Initial 802.11ac Wave 1 SU-MIMO (Single-User, Multiple Input, Multiple Output) technology allows an earlier-generation AP, such as the UniFi AC Pro AP, to communicate with only one client at a time.

802.11ac Wave 2 MU-MIMO (Multi-User, Multiple Input, Multiple Output) technology allows a Wave 2 AP, such as the UniFi AP Flex HD, to communicate with multiple clients at the same time – significantly increasing multi-user throughput and overall user experience. The following describes a 4-client scenario:

MU-MIMO Assuming the same conditions, a Wave 2 AP provides up to 75% improvement overall over a Wave 1 AP. This improvement increases wireless performance and/or serves more clients at the same performance level.

4x4 Spatial Streams At any single time, a Wave 2 AP can communicate with the following MU-MIMO clients:
- four 1x1 clients
- two 2x2 clients
- one 2x2 client and two 1x1 clients
- one 3x3 client and one 1x1 client

A 4x4 Wave 2 AP delivers up to 33% greater performance than a Wave 1 AP that is 3x3 in both radio bands.

MU-MIMO

High-Density Scenarios
Both Wave 1 and Wave 2 APs offer 28 independent (non-overlapping) channels: three for the 2.4 GHz band and twenty-five for the 5 GHz band, including DFS channels. When you use the 2.4 GHz band in a high-density location, you encounter self-interference and channel saturation. When you use the 5 GHz band, you can deploy smaller cells (coverage areas), so you can support more clients in any cell that deploys more than one AP.

With the advantages of MU-MIMO technology and 4x4 spatial streams, the UniFi AP Flex HD can support more than triple the number of users than a typical Wave 1 AP. In practice, the maximum number of users the UniFi AP Flex HD can support is limited by radio link airtime. This depends on the amount of traffic each device creates, types of devices, network configuration, and the presence of other APs on the same channel.

Versatile Mounting Options
The sleek, compact design lets you locate the UniFi AP Flex HD near users.

Versatile Mounting Options

Ideal Mesh Point Solution
The UniFi AP Flex HD provides a 4x4 MIMO mesh backhaul for double the speed of traditional mesh solutions.

Ubiquiti UAP-FlexHD Technical Specification

General
Dimensions: 48.50 x 159.49 mm (1.90 x 6.28")
Weight: 315 g (0.69 lb)
Networking Interface: (1) 10/100/1000 Ethernet Port
Button: Reset
LED: System / Status
Power Method: 802.3af
Power Supply: 802.3af 48V, 0.32A Gigabit PoE Adapter
Max Power Consumption: 10.5W
Voltage Range: 44 - 57VDC
Operating Frequency:
- 2.4 GHz
- 5 GHz
Max TX Power EIRP:
- 2.4 GHz: 23 dBm
- 5 GHz: 26 dBm
Throughput:
- 2.4 GHz: 300 Mbps
- 5 GHz: 1733 Mbps
Antenna Gain:
- 2.4 GHz: 1.6 dBi
- 5 GHz: 4 dBi
WiFi Standards: 802.11 a/b/g/n/ac/ac-wave2
Wireless Security: WEP, WPA-PSK, WPA-Enterprise (WPA/WPA2, TKIP/AES)
Mounting: Ceiling/Pole/Tabletop/Wall
Operating Temperature: -30 to 70° C (-22 to 158° F)
Operating Humidity: 5 to 95% Noncondensing
Certifications: CE, FCC, IC

Understanding Our Returns and Refunds Policy

Easy Returns for Your Convenience

At our company, we believe that shopping should be hassle-free. This is why we have made our returns and refunds process as easy as possible. If you receive a product that doesn’t meet your expectations or is defective, you can return it within 30 days for a full refund. Our team is always here to assist you, so you don’t have to worry about complicated steps when returning an item.

Refund Process Made Simple

Once we receive your returned item, we initiate the refund process immediately. Typically, refunds are processed within 5-7 business days. However, there might be variations due to your bank's policies. We understand that getting your money back promptly is essential, which is why we prioritize quick refunds. Because of this efficiency, customers can trust that their satisfaction is our highest priority.

Customer Support for Returns and Refunds

If you have questions about our returns and refunds, our customer support team is always ready to help. You can reach out via email or phone for assistance with your return. We want you to feel confident when making a purchase, and knowing that we value customer support makes the process smoother. So, don’t hesitate to contact us if you need clarification or help!