Teltonika TRB142 Industrial Rugged LTE RS232 Gateway
![Teltonika TRB142 Industrial Rugged LTE RS232 Gateway Teltonika VoIP Supplies]()
![Teltonika TRB142 Industrial Rugged LTE RS232 Gateway Teltonika VoIP Supplies]()
Teltonika TRB142 Industrial Rugged LTE RS232 Gateway
Available:In Stock
£120.60
Teltonika TRB142 Industrial Rugged LTE RS232 Gateway
Teltonika RMS Banner
The Teltonika TRB142 comes with a widely used RS232 interface for remote device management. It is equipped with mission-critical LTE Cat 1 capabilities and software based on OpenWRT, hence offering a high degree of customisation.
Teltonika TRB142 Key Features
4G/LTE (Cat 1), 3G, 2G connectivity
Rugged aluminium housing
Equipped with RS232 for serial communication
Wide range of supported power supply voltages
Compact size, easy integration
Teltonika Remote Management System compatible
Just like the other TRB series products, it provides a wide range of software features such as SMS control, VPN, IPsec, Firewall, and FOTA support. This gateway is durable, offers a wide range of power supply voltages, and is compatible with Teltonika Networks Remote Management System (RMS).
Teltonika TRB142 Technical Specifications
Mobile
Mobile module: 4G (LTE) – Cat 1 up to 10 Mbps, 3G – Up to 42 Mbps, 2G – Up to 236.8 kbps
Bridge: Direct connection (bridge) between mobile ISP and device on LAN
Status: Signal strength (RSSI), SINR, RSRP, RSRQ, EC/IO, RSCP Bytes sent/received
SMS/Call: SMS status, SMS configuration, Call utilities
Network
Network protocols: TCP, UDP, IPv4, IPv6, ICMP, NTP, DNS, HTTP, HTTPS, SSL v3, TLS, PPP, SSH, DHCP, SNMP, MQTT
Bridge: Static routing
Connection monitoring: Ping Reboot, Periodic Reboot, LCP and ICMP for link inspection, Wget
Firewall: Port forwards, traffic rules, custom rules
DHCP: Static and dynamic IP allocation
QoS / Smart Queue Management (SQM) (planned): Traffic priority queuing by source/destination, service, protocol or port
DHCP: Supported >25 service providers, others can be configured manually
Security
Authentication: Pre-shared key, digital certificates, X.509 certificates
Firewall: Pre-configured firewall rules can be enabled via the WebUI, unlimited firewall configuration via CLI; NAT; NAT-T
Access control: Flexible access control of TCP, UDP, ICMP packets, MAC address filter
VPN
OpenVPN: Multiple clients and a server can run simultaneously, 12 encryption methods
OpenVPN Encryption: DES-CBC, RC2-CBC, DES-EDE-CBC, DES-EDE3-CBC, DESX-CBC, BF-CBC, RC2-40-CBC, CAST5-CBC, RC2-64-CBC, AES-128-CBC, AES-192-CBC, AES-256-CBC
IPsec: IKEv1, IKEv2, supports up to 5 x VPN IPsec tunnels (instances), with 5 encryption methods (DES, 3DES, AES128, AES192, AES256)
GRE: GRE tunnel
PPTP, L2TP: Client/Server services can run simultaneously
Monitoring & Management
WEB UI: HTTP/HTTPS, status, configuration, FW update, CLI, troubleshoot, system log, kernel log
FOTA: Firmware update from sever, automatic notification
SSH: SSH (v1, v2)
SMS: SMS status, SMS configuration
MQTT: MQTT Broker, MQTT publisher
JSON-RPC: Management API over HTTP/HTTPS
Modbus: Modbus TCP status/control
RMS: Teltonika Remote Management System (RMS)
System Characteristics
CPU: ARM Cortex-A7 1.2 GHz CPU
RAM: 128 MB (50 MB available for userspace)
FLASH memory: 512 MB (200 MB available for userspace)
Serial Communication Modes
Modes: Console, OverIP, Modem (Full or Partial control), Modbus RTU master, Modbus gateway, NTRIP client
Modbus TCP Slave
ID filtering: Respond to one ID in range [1;255] or any
Allow remote access: Allow access through WAN
Custom registers: Modbus TCP custom register block, which allows to read/write to a file inside the router, and can be used to extend Modbus TCP slave functionality
Supported functions: 01, 02, 03, 04, 05, 06, 15, 16
Supported data formats: 8 bit: INT, UINT; 16 bit: INT, UINT (MSB or LSB first); 32 bit: float, INT, UINT (ABCD (big-endian), DCBA (little-endian), CDAB, BADC)
Modbus RTU Master
Suported baud rates: From 300 to 115200
Supported functions: 01, 02, 03, 04, 05, 06, 15, 16
Supported data formats: 8 bit: INT, UINT; 16 bit: INT, UINT (MSB or LSB first); 32 bit: float, INT, UINT (ABCD (big-endian), DCBA (little-endian), CDAB, BADC)
Number of data bits: From 5 to 8
Number of stop bits: 1 or 2
Parity: None, Even, Odd
Flow control: None, RTS/CTS, Xon/Xof
Modbus Data to Server
Protocol: HTTP(S), MQTT
Firmware/Configuration
WEB UI: Update FW from file, check FW on server, configuration profiles, configuration backup, restore point
FOTA: Update FW/configuration from server
RMS: Update FW/configuration for multiple devices
Keep settings: Update FW without losing current configuration
Firmware Customisation
Operating system: RutOS (OpenLinux based Linux OS)
Supported languages: Busybox shell, Lua, C, C++
Development tools: SDK package with build environment provided
Input/Output
Configurable I/O: 2 x Digital Inputs/Outputs
Events: SMS status
Power
Connector: 4 pin industrial DC power socket
Input voltage range: 9 – 30 VDC (4 pin industrial socket), reverse polarity protection, surge protection >33 VDC 10μ max
Power consumption: < 5 W
Physical Interfaces (Ports, LEDs, Anntenas, Buttons, SIM)
RS232: RS232 interface, DB9 socket, 5 pin configuration with flow control
I/Os: 2 Inputs/Outputs pin on 4 pin power connector
USB: Virtual network interface via USB
Status LEDs: 3 x connection type status LEDs, 5 x connection strength LEDs, 1x Power LED
SIM: 1 x SIM slot (Mini SIM – 2FF), 1.8 V/3 V
Power: 4 pin power connector with 2 x configurable Digital Inputs/Outputs
Anntenas: 1 x SMA for LTE
Reset: Restore factory settings button
Physical Specifications
Casing material: Aluminum housing
Dimensions: 64.4 x 74.5 x 25 mm (L x W x H)
Weight: 135 g
Mounting options: Bottom and sideways DIN rail, Flat surface and direct PCB on DIN-Rail mounting options
Operating Environment
Operating temperature: -40 °C to 75 °C
Operating humidity: 10 % to 90 % non-condensing
Ingress Protection Rating: IP30
Regulatory & Type Approvals
Regulatory: CE/RED, EAC, RoHS, WEEE
EMI
Standards: Draft ETSI EN 301 489-1 V2.2.0, Draft EN 301 489-19 V2.1.0, Draft ETSI EN 301 489-52 V1.1.0
ESD: EN 61000-4-2:2009
RS: EN 61000-4-3:2006 + A1:2008 + A2:2010
EFT: EN 61000-4-4:2012
Surge protection: EN 61000-4-5:2014
CS: EN 61000-4-6:2014
DIP: EN 61000-4-11:2004
Teltonika RMS Banner
The Teltonika TRB142 comes with a widely used RS232 interface for remote device management. It is equipped with mission-critical LTE Cat 1 capabilities and software based on OpenWRT, hence offering a high degree of customisation.
Teltonika TRB142 Key Features
4G/LTE (Cat 1), 3G, 2G connectivity
Rugged aluminium housing
Equipped with RS232 for serial communication
Wide range of supported power supply voltages
Compact size, easy integration
Teltonika Remote Management System compatible
Just like the other TRB series products, it provides a wide range of software features such as SMS control, VPN, IPsec, Firewall, and FOTA support. This gateway is durable, offers a wide range of power supply voltages, and is compatible with Teltonika Networks Remote Management System (RMS).
Teltonika TRB142 Technical Specifications
Mobile
Mobile module: 4G (LTE) – Cat 1 up to 10 Mbps, 3G – Up to 42 Mbps, 2G – Up to 236.8 kbps
Bridge: Direct connection (bridge) between mobile ISP and device on LAN
Status: Signal strength (RSSI), SINR, RSRP, RSRQ, EC/IO, RSCP Bytes sent/received
SMS/Call: SMS status, SMS configuration, Call utilities
Network
Network protocols: TCP, UDP, IPv4, IPv6, ICMP, NTP, DNS, HTTP, HTTPS, SSL v3, TLS, PPP, SSH, DHCP, SNMP, MQTT
Bridge: Static routing
Connection monitoring: Ping Reboot, Periodic Reboot, LCP and ICMP for link inspection, Wget
Firewall: Port forwards, traffic rules, custom rules
DHCP: Static and dynamic IP allocation
QoS / Smart Queue Management (SQM) (planned): Traffic priority queuing by source/destination, service, protocol or port
DHCP: Supported >25 service providers, others can be configured manually
Security
Authentication: Pre-shared key, digital certificates, X.509 certificates
Firewall: Pre-configured firewall rules can be enabled via the WebUI, unlimited firewall configuration via CLI; NAT; NAT-T
Access control: Flexible access control of TCP, UDP, ICMP packets, MAC address filter
VPN
OpenVPN: Multiple clients and a server can run simultaneously, 12 encryption methods
OpenVPN Encryption: DES-CBC, RC2-CBC, DES-EDE-CBC, DES-EDE3-CBC, DESX-CBC, BF-CBC, RC2-40-CBC, CAST5-CBC, RC2-64-CBC, AES-128-CBC, AES-192-CBC, AES-256-CBC
IPsec: IKEv1, IKEv2, supports up to 5 x VPN IPsec tunnels (instances), with 5 encryption methods (DES, 3DES, AES128, AES192, AES256)
GRE: GRE tunnel
PPTP, L2TP: Client/Server services can run simultaneously
Monitoring & Management
WEB UI: HTTP/HTTPS, status, configuration, FW update, CLI, troubleshoot, system log, kernel log
FOTA: Firmware update from sever, automatic notification
SSH: SSH (v1, v2)
SMS: SMS status, SMS configuration
MQTT: MQTT Broker, MQTT publisher
JSON-RPC: Management API over HTTP/HTTPS
Modbus: Modbus TCP status/control
RMS: Teltonika Remote Management System (RMS)
System Characteristics
CPU: ARM Cortex-A7 1.2 GHz CPU
RAM: 128 MB (50 MB available for userspace)
FLASH memory: 512 MB (200 MB available for userspace)
Serial Communication Modes
Modes: Console, OverIP, Modem (Full or Partial control), Modbus RTU master, Modbus gateway, NTRIP client
Modbus TCP Slave
ID filtering: Respond to one ID in range [1;255] or any
Allow remote access: Allow access through WAN
Custom registers: Modbus TCP custom register block, which allows to read/write to a file inside the router, and can be used to extend Modbus TCP slave functionality
Supported functions: 01, 02, 03, 04, 05, 06, 15, 16
Supported data formats: 8 bit: INT, UINT; 16 bit: INT, UINT (MSB or LSB first); 32 bit: float, INT, UINT (ABCD (big-endian), DCBA (little-endian), CDAB, BADC)
Modbus RTU Master
Suported baud rates: From 300 to 115200
Supported functions: 01, 02, 03, 04, 05, 06, 15, 16
Supported data formats: 8 bit: INT, UINT; 16 bit: INT, UINT (MSB or LSB first); 32 bit: float, INT, UINT (ABCD (big-endian), DCBA (little-endian), CDAB, BADC)
Number of data bits: From 5 to 8
Number of stop bits: 1 or 2
Parity: None, Even, Odd
Flow control: None, RTS/CTS, Xon/Xof
Modbus Data to Server
Protocol: HTTP(S), MQTT
Firmware/Configuration
WEB UI: Update FW from file, check FW on server, configuration profiles, configuration backup, restore point
FOTA: Update FW/configuration from server
RMS: Update FW/configuration for multiple devices
Keep settings: Update FW without losing current configuration
Firmware Customisation
Operating system: RutOS (OpenLinux based Linux OS)
Supported languages: Busybox shell, Lua, C, C++
Development tools: SDK package with build environment provided
Input/Output
Configurable I/O: 2 x Digital Inputs/Outputs
Events: SMS status
Power
Connector: 4 pin industrial DC power socket
Input voltage range: 9 – 30 VDC (4 pin industrial socket), reverse polarity protection, surge protection >33 VDC 10μ max
Power consumption: < 5 W
Physical Interfaces (Ports, LEDs, Anntenas, Buttons, SIM)
RS232: RS232 interface, DB9 socket, 5 pin configuration with flow control
I/Os: 2 Inputs/Outputs pin on 4 pin power connector
USB: Virtual network interface via USB
Status LEDs: 3 x connection type status LEDs, 5 x connection strength LEDs, 1x Power LED
SIM: 1 x SIM slot (Mini SIM – 2FF), 1.8 V/3 V
Power: 4 pin power connector with 2 x configurable Digital Inputs/Outputs
Anntenas: 1 x SMA for LTE
Reset: Restore factory settings button
Physical Specifications
Casing material: Aluminum housing
Dimensions: 64.4 x 74.5 x 25 mm (L x W x H)
Weight: 135 g
Mounting options: Bottom and sideways DIN rail, Flat surface and direct PCB on DIN-Rail mounting options
Operating Environment
Operating temperature: -40 °C to 75 °C
Operating humidity: 10 % to 90 % non-condensing
Ingress Protection Rating: IP30
Regulatory & Type Approvals
Regulatory: CE/RED, EAC, RoHS, WEEE
EMI
Standards: Draft ETSI EN 301 489-1 V2.2.0, Draft EN 301 489-19 V2.1.0, Draft ETSI EN 301 489-52 V1.1.0
ESD: EN 61000-4-2:2009
RS: EN 61000-4-3:2006 + A1:2008 + A2:2010
EFT: EN 61000-4-4:2012
Surge protection: EN 61000-4-5:2014
CS: EN 61000-4-6:2014
DIP: EN 61000-4-11:2004
Teltonika TRB142 Industrial Rugged LTE RS232 Gateway
Teltonika RMS Banner
The Teltonika TRB142 comes with a widely used RS232 interface for remote device management. It is equipped with mission-critical LTE Cat 1 capabilities and software based on OpenWRT, hence offering a high degree of customisation.
Teltonika TRB142 Key Features
4G/LTE (Cat 1), 3G, 2G connectivity
Rugged aluminium housing
Equipped with RS232 for serial communication
Wide range of supported power supply voltages
Compact size, easy integration
Teltonika Remote Management System compatible
Just like the other TRB series products, it provides a wide range of software features such as SMS control, VPN, IPsec, Firewall, and FOTA support. This gateway is durable, offers a wide range of power supply voltages, and is compatible with Teltonika Networks Remote Management System (RMS).
Teltonika TRB142 Technical Specifications
Mobile
Mobile module: 4G (LTE) – Cat 1 up to 10 Mbps, 3G – Up to 42 Mbps, 2G – Up to 236.8 kbps
Bridge: Direct connection (bridge) between mobile ISP and device on LAN
Status: Signal strength (RSSI), SINR, RSRP, RSRQ, EC/IO, RSCP Bytes sent/received
SMS/Call: SMS status, SMS configuration, Call utilities
Network
Network protocols: TCP, UDP, IPv4, IPv6, ICMP, NTP, DNS, HTTP, HTTPS, SSL v3, TLS, PPP, SSH, DHCP, SNMP, MQTT
Bridge: Static routing
Connection monitoring: Ping Reboot, Periodic Reboot, LCP and ICMP for link inspection, Wget
Firewall: Port forwards, traffic rules, custom rules
DHCP: Static and dynamic IP allocation
QoS / Smart Queue Management (SQM) (planned): Traffic priority queuing by source/destination, service, protocol or port
DHCP: Supported >25 service providers, others can be configured manually
Security
Authentication: Pre-shared key, digital certificates, X.509 certificates
Firewall: Pre-configured firewall rules can be enabled via the WebUI, unlimited firewall configuration via CLI; NAT; NAT-T
Access control: Flexible access control of TCP, UDP, ICMP packets, MAC address filter
VPN
OpenVPN: Multiple clients and a server can run simultaneously, 12 encryption methods
OpenVPN Encryption: DES-CBC, RC2-CBC, DES-EDE-CBC, DES-EDE3-CBC, DESX-CBC, BF-CBC, RC2-40-CBC, CAST5-CBC, RC2-64-CBC, AES-128-CBC, AES-192-CBC, AES-256-CBC
IPsec: IKEv1, IKEv2, supports up to 5 x VPN IPsec tunnels (instances), with 5 encryption methods (DES, 3DES, AES128, AES192, AES256)
GRE: GRE tunnel
PPTP, L2TP: Client/Server services can run simultaneously
Monitoring & Management
WEB UI: HTTP/HTTPS, status, configuration, FW update, CLI, troubleshoot, system log, kernel log
FOTA: Firmware update from sever, automatic notification
SSH: SSH (v1, v2)
SMS: SMS status, SMS configuration
MQTT: MQTT Broker, MQTT publisher
JSON-RPC: Management API over HTTP/HTTPS
Modbus: Modbus TCP status/control
RMS: Teltonika Remote Management System (RMS)
System Characteristics
CPU: ARM Cortex-A7 1.2 GHz CPU
RAM: 128 MB (50 MB available for userspace)
FLASH memory: 512 MB (200 MB available for userspace)
Serial Communication Modes
Modes: Console, OverIP, Modem (Full or Partial control), Modbus RTU master, Modbus gateway, NTRIP client
Modbus TCP Slave
ID filtering: Respond to one ID in range [1;255] or any
Allow remote access: Allow access through WAN
Custom registers: Modbus TCP custom register block, which allows to read/write to a file inside the router, and can be used to extend Modbus TCP slave functionality
Supported functions: 01, 02, 03, 04, 05, 06, 15, 16
Supported data formats: 8 bit: INT, UINT; 16 bit: INT, UINT (MSB or LSB first); 32 bit: float, INT, UINT (ABCD (big-endian), DCBA (little-endian), CDAB, BADC)
Modbus RTU Master
Suported baud rates: From 300 to 115200
Supported functions: 01, 02, 03, 04, 05, 06, 15, 16
Supported data formats: 8 bit: INT, UINT; 16 bit: INT, UINT (MSB or LSB first); 32 bit: float, INT, UINT (ABCD (big-endian), DCBA (little-endian), CDAB, BADC)
Number of data bits: From 5 to 8
Number of stop bits: 1 or 2
Parity: None, Even, Odd
Flow control: None, RTS/CTS, Xon/Xof
Modbus Data to Server
Protocol: HTTP(S), MQTT
Firmware/Configuration
WEB UI: Update FW from file, check FW on server, configuration profiles, configuration backup, restore point
FOTA: Update FW/configuration from server
RMS: Update FW/configuration for multiple devices
Keep settings: Update FW without losing current configuration
Firmware Customisation
Operating system: RutOS (OpenLinux based Linux OS)
Supported languages: Busybox shell, Lua, C, C++
Development tools: SDK package with build environment provided
Input/Output
Configurable I/O: 2 x Digital Inputs/Outputs
Events: SMS status
Power
Connector: 4 pin industrial DC power socket
Input voltage range: 9 – 30 VDC (4 pin industrial socket), reverse polarity protection, surge protection >33 VDC 10μ max
Power consumption: < 5 W
Physical Interfaces (Ports, LEDs, Anntenas, Buttons, SIM)
RS232: RS232 interface, DB9 socket, 5 pin configuration with flow control
I/Os: 2 Inputs/Outputs pin on 4 pin power connector
USB: Virtual network interface via USB
Status LEDs: 3 x connection type status LEDs, 5 x connection strength LEDs, 1x Power LED
SIM: 1 x SIM slot (Mini SIM – 2FF), 1.8 V/3 V
Power: 4 pin power connector with 2 x configurable Digital Inputs/Outputs
Anntenas: 1 x SMA for LTE
Reset: Restore factory settings button
Physical Specifications
Casing material: Aluminum housing
Dimensions: 64.4 x 74.5 x 25 mm (L x W x H)
Weight: 135 g
Mounting options: Bottom and sideways DIN rail, Flat surface and direct PCB on DIN-Rail mounting options
Operating Environment
Operating temperature: -40 °C to 75 °C
Operating humidity: 10 % to 90 % non-condensing
Ingress Protection Rating: IP30
Regulatory & Type Approvals
Regulatory: CE/RED, EAC, RoHS, WEEE
EMI
Standards: Draft ETSI EN 301 489-1 V2.2.0, Draft EN 301 489-19 V2.1.0, Draft ETSI EN 301 489-52 V1.1.0
ESD: EN 61000-4-2:2009
RS: EN 61000-4-3:2006 + A1:2008 + A2:2010
EFT: EN 61000-4-4:2012
Surge protection: EN 61000-4-5:2014
CS: EN 61000-4-6:2014
DIP: EN 61000-4-11:2004
Teltonika RMS Banner
The Teltonika TRB142 comes with a widely used RS232 interface for remote device management. It is equipped with mission-critical LTE Cat 1 capabilities and software based on OpenWRT, hence offering a high degree of customisation.
Teltonika TRB142 Key Features
4G/LTE (Cat 1), 3G, 2G connectivity
Rugged aluminium housing
Equipped with RS232 for serial communication
Wide range of supported power supply voltages
Compact size, easy integration
Teltonika Remote Management System compatible
Just like the other TRB series products, it provides a wide range of software features such as SMS control, VPN, IPsec, Firewall, and FOTA support. This gateway is durable, offers a wide range of power supply voltages, and is compatible with Teltonika Networks Remote Management System (RMS).
Teltonika TRB142 Technical Specifications
Mobile
Mobile module: 4G (LTE) – Cat 1 up to 10 Mbps, 3G – Up to 42 Mbps, 2G – Up to 236.8 kbps
Bridge: Direct connection (bridge) between mobile ISP and device on LAN
Status: Signal strength (RSSI), SINR, RSRP, RSRQ, EC/IO, RSCP Bytes sent/received
SMS/Call: SMS status, SMS configuration, Call utilities
Network
Network protocols: TCP, UDP, IPv4, IPv6, ICMP, NTP, DNS, HTTP, HTTPS, SSL v3, TLS, PPP, SSH, DHCP, SNMP, MQTT
Bridge: Static routing
Connection monitoring: Ping Reboot, Periodic Reboot, LCP and ICMP for link inspection, Wget
Firewall: Port forwards, traffic rules, custom rules
DHCP: Static and dynamic IP allocation
QoS / Smart Queue Management (SQM) (planned): Traffic priority queuing by source/destination, service, protocol or port
DHCP: Supported >25 service providers, others can be configured manually
Security
Authentication: Pre-shared key, digital certificates, X.509 certificates
Firewall: Pre-configured firewall rules can be enabled via the WebUI, unlimited firewall configuration via CLI; NAT; NAT-T
Access control: Flexible access control of TCP, UDP, ICMP packets, MAC address filter
VPN
OpenVPN: Multiple clients and a server can run simultaneously, 12 encryption methods
OpenVPN Encryption: DES-CBC, RC2-CBC, DES-EDE-CBC, DES-EDE3-CBC, DESX-CBC, BF-CBC, RC2-40-CBC, CAST5-CBC, RC2-64-CBC, AES-128-CBC, AES-192-CBC, AES-256-CBC
IPsec: IKEv1, IKEv2, supports up to 5 x VPN IPsec tunnels (instances), with 5 encryption methods (DES, 3DES, AES128, AES192, AES256)
GRE: GRE tunnel
PPTP, L2TP: Client/Server services can run simultaneously
Monitoring & Management
WEB UI: HTTP/HTTPS, status, configuration, FW update, CLI, troubleshoot, system log, kernel log
FOTA: Firmware update from sever, automatic notification
SSH: SSH (v1, v2)
SMS: SMS status, SMS configuration
MQTT: MQTT Broker, MQTT publisher
JSON-RPC: Management API over HTTP/HTTPS
Modbus: Modbus TCP status/control
RMS: Teltonika Remote Management System (RMS)
System Characteristics
CPU: ARM Cortex-A7 1.2 GHz CPU
RAM: 128 MB (50 MB available for userspace)
FLASH memory: 512 MB (200 MB available for userspace)
Serial Communication Modes
Modes: Console, OverIP, Modem (Full or Partial control), Modbus RTU master, Modbus gateway, NTRIP client
Modbus TCP Slave
ID filtering: Respond to one ID in range [1;255] or any
Allow remote access: Allow access through WAN
Custom registers: Modbus TCP custom register block, which allows to read/write to a file inside the router, and can be used to extend Modbus TCP slave functionality
Supported functions: 01, 02, 03, 04, 05, 06, 15, 16
Supported data formats: 8 bit: INT, UINT; 16 bit: INT, UINT (MSB or LSB first); 32 bit: float, INT, UINT (ABCD (big-endian), DCBA (little-endian), CDAB, BADC)
Modbus RTU Master
Suported baud rates: From 300 to 115200
Supported functions: 01, 02, 03, 04, 05, 06, 15, 16
Supported data formats: 8 bit: INT, UINT; 16 bit: INT, UINT (MSB or LSB first); 32 bit: float, INT, UINT (ABCD (big-endian), DCBA (little-endian), CDAB, BADC)
Number of data bits: From 5 to 8
Number of stop bits: 1 or 2
Parity: None, Even, Odd
Flow control: None, RTS/CTS, Xon/Xof
Modbus Data to Server
Protocol: HTTP(S), MQTT
Firmware/Configuration
WEB UI: Update FW from file, check FW on server, configuration profiles, configuration backup, restore point
FOTA: Update FW/configuration from server
RMS: Update FW/configuration for multiple devices
Keep settings: Update FW without losing current configuration
Firmware Customisation
Operating system: RutOS (OpenLinux based Linux OS)
Supported languages: Busybox shell, Lua, C, C++
Development tools: SDK package with build environment provided
Input/Output
Configurable I/O: 2 x Digital Inputs/Outputs
Events: SMS status
Power
Connector: 4 pin industrial DC power socket
Input voltage range: 9 – 30 VDC (4 pin industrial socket), reverse polarity protection, surge protection >33 VDC 10μ max
Power consumption: < 5 W
Physical Interfaces (Ports, LEDs, Anntenas, Buttons, SIM)
RS232: RS232 interface, DB9 socket, 5 pin configuration with flow control
I/Os: 2 Inputs/Outputs pin on 4 pin power connector
USB: Virtual network interface via USB
Status LEDs: 3 x connection type status LEDs, 5 x connection strength LEDs, 1x Power LED
SIM: 1 x SIM slot (Mini SIM – 2FF), 1.8 V/3 V
Power: 4 pin power connector with 2 x configurable Digital Inputs/Outputs
Anntenas: 1 x SMA for LTE
Reset: Restore factory settings button
Physical Specifications
Casing material: Aluminum housing
Dimensions: 64.4 x 74.5 x 25 mm (L x W x H)
Weight: 135 g
Mounting options: Bottom and sideways DIN rail, Flat surface and direct PCB on DIN-Rail mounting options
Operating Environment
Operating temperature: -40 °C to 75 °C
Operating humidity: 10 % to 90 % non-condensing
Ingress Protection Rating: IP30
Regulatory & Type Approvals
Regulatory: CE/RED, EAC, RoHS, WEEE
EMI
Standards: Draft ETSI EN 301 489-1 V2.2.0, Draft EN 301 489-19 V2.1.0, Draft ETSI EN 301 489-52 V1.1.0
ESD: EN 61000-4-2:2009
RS: EN 61000-4-3:2006 + A1:2008 + A2:2010
EFT: EN 61000-4-4:2012
Surge protection: EN 61000-4-5:2014
CS: EN 61000-4-6:2014
DIP: EN 61000-4-11:2004
Understanding Our Returns and Refunds Policy
Easy Returns for Your Convenience
At our company, we believe that shopping should be hassle-free. This is why we have made our returns and refunds process as easy as possible. If you receive a product that doesn’t meet your expectations or is defective, you can return it within 30 days for a full refund. Our team is always here to assist you, so you don’t have to worry about complicated steps when returning an item.
Refund Process Made Simple
Once we receive your returned item, we initiate the refund process immediately. Typically, refunds are processed within 5-7 business days. However, there might be variations due to your bank's policies. We understand that getting your money back promptly is essential, which is why we prioritize quick refunds. Because of this efficiency, customers can trust that their satisfaction is our highest priority.
Customer Support for Returns and Refunds
If you have questions about our returns and refunds, our customer support team is always ready to help. You can reach out via email or phone for assistance with your return. We want you to feel confident when making a purchase, and knowing that we value customer support makes the process smoother. So, don’t hesitate to contact us if you need clarification or help!
