Dinstar DAG1000-4O 4*FXO Gateway (DAG1000-4O)
Review: 5 - "A masterpiece of literature" by , written on May 4, 20020
Great
Categories

Dinstar DAG1000-4O 4*FXO Gateway (DAG1000-4O)

Available:In Stock
£168.48
Image
    • PRODUCT DETAILS
 
    • REVIEWS
 
  • WHITE PAPERS / CASE STUDIES

Dinstar DAG1000-4O 4*FXO Gateway (DAG1000-4O)

DAG1000-4O FXO analog gateway is a type of access gateway offering seamless connectivity between IP-based telephony networks and legacy telephones (POTS) and PBX systems. The analog gateway has 4 FXO ports and is used to connect to analog PBX or the PSTN lines of telecom carriers. With the standard SIP protocol, it's compatible with leading IMS/NGN platforms and SIP-based IP Phone systems. It provides low-cost and easy-to-use VoIP solutions for small businesses, SOHO, remote offices as well as enterprises with multiple branches.

Dinstar DAG1000 Key Features

    • Cost effective gateway with 4 FXO port
    • Support IPv4 and IPv6
    • Elastix/ Broadsoft Certification
    • Multiple codecs: G.711A/U, G.723.1, G.729A/B, etc
    • Fully compatible with leading IMS/NGN, SIP based IP telephony system
      Dinstar DAG1000 - Technical Specifications

      Key Features

      • Fax over IP (T.38 and Pass-Through), Support IPv4 and IPv6, TR069 and SNMP, Elastix/Broadsoft Certification, Multiple codecs: G.711A/U,G.723.1,G.729A/B etc. Fully compatible with leading IMS/NGN, SIP based IP telephony system.

      Interfaces

      • Telephone Interfaces: 4 FXO, RJ11
      • Ethernet Interfaces: 1* WAN, 3* LAN, 10/100Mbps, RJ-45

      Voice & Fax

      • G.711A/U law, G.723.1, G.729A/B, • Silence Suppression • Comfort Noise Generation(CNG) • Voice Activity Detection(VAD) • Echo Cancellation(G.168), with up to 128ms • Adaptive (Dynamic) Jitter Buffer • Programmable Gain Control • T.38/Pass-through • Modem/POS • DTMF mode: Signal/RFC2833/INBAND • VLAN 802.1P/ 802.1Q • Layer3 QoS and DiffServ.

      FXO

      • Connector: RJ11 • Dial Mode: DTMF/Pulse Dialing • Caller ID: FSK, DTMF • Polarity Reversal • Answer Delay • Busy Tone Detection • No Current Detection

      VoIP

      • Protocol: SIP v2.0 (UDP/TCP),RFC3261 SDP,RTP(RFC2833), RFC3262, 3263,3264,3265,3515,2976,3311 • RTP/RTCP, RFC2198, 1889 • RFC4028 Session Timer • RFC3266 IPv6 in SDP • RFC2806 TEL URI • RFC3581 NAT,rport • Primary/Backup SIP Server • Outbound Proxy • DNS SRV/ A Query/NATPR Query • SIP Trunk • Early Media/Early Answer • NAT: STUN, Static/Dynamic NAT

      Network Features

      • Static/Dynamic IP • PPPoE • DHCP Client • IPv4/IPv6 • TCP, UDP, TFTP, FTP, ARP, RARP, Ping, NTP, SNTP, HTTP/HTTPS, DNS • Ping / Tracert • DHCP Option 66, 120, 121

      Maintenance

      • • SNMP v1/v2/v3 • TR069 • Auto Provisioning • Web/Telnet • Configuration Backup/Restore • Firmware Upgrade via Web • CDR • Syslog • Network Capture • NTP/Daylight Saving Time • IVR local Maintenance • Cloud-based Management

      Power

      • 12W

      Environmental

      • Operating Temperature: 0 ℃ ~ 45 ℃ Storage Temperature: -20 ℃ ~80 ℃ • Humidity: 10%-90% Non-Condensing

      Physical

      • Dimension: 242*152*40mm (LxWxH), Unit Weight- 1 kg

      Compliance

      • Compliance: CE, FCC
        • PRODUCT DETAILS
       
        • REVIEWS
       
      • WHITE PAPERS / CASE STUDIES

      Dinstar DAG1000-4O 4*FXO Gateway (DAG1000-4O)

      DAG1000-4O FXO analog gateway is a type of access gateway offering seamless connectivity between IP-based telephony networks and legacy telephones (POTS) and PBX systems. The analog gateway has 4 FXO ports and is used to connect to analog PBX or the PSTN lines of telecom carriers. With the standard SIP protocol, it's compatible with leading IMS/NGN platforms and SIP-based IP Phone systems. It provides low-cost and easy-to-use VoIP solutions for small businesses, SOHO, remote offices as well as enterprises with multiple branches.

      Dinstar DAG1000 Key Features

        • Cost effective gateway with 4 FXO port
        • Support IPv4 and IPv6
        • Elastix/ Broadsoft Certification
        • Multiple codecs: G.711A/U, G.723.1, G.729A/B, etc
        • Fully compatible with leading IMS/NGN, SIP based IP telephony system
          Dinstar DAG1000 - Technical Specifications

          Key Features

          • Fax over IP (T.38 and Pass-Through), Support IPv4 and IPv6, TR069 and SNMP, Elastix/Broadsoft Certification, Multiple codecs: G.711A/U,G.723.1,G.729A/B etc. Fully compatible with leading IMS/NGN, SIP based IP telephony system.

          Interfaces

          • Telephone Interfaces: 4 FXO, RJ11
          • Ethernet Interfaces: 1* WAN, 3* LAN, 10/100Mbps, RJ-45

          Voice & Fax

          • G.711A/U law, G.723.1, G.729A/B, • Silence Suppression • Comfort Noise Generation(CNG) • Voice Activity Detection(VAD) • Echo Cancellation(G.168), with up to 128ms • Adaptive (Dynamic) Jitter Buffer • Programmable Gain Control • T.38/Pass-through • Modem/POS • DTMF mode: Signal/RFC2833/INBAND • VLAN 802.1P/ 802.1Q • Layer3 QoS and DiffServ.

          FXO

          • Connector: RJ11 • Dial Mode: DTMF/Pulse Dialing • Caller ID: FSK, DTMF • Polarity Reversal • Answer Delay • Busy Tone Detection • No Current Detection

          VoIP

          • Protocol: SIP v2.0 (UDP/TCP),RFC3261 SDP,RTP(RFC2833), RFC3262, 3263,3264,3265,3515,2976,3311 • RTP/RTCP, RFC2198, 1889 • RFC4028 Session Timer • RFC3266 IPv6 in SDP • RFC2806 TEL URI • RFC3581 NAT,rport • Primary/Backup SIP Server • Outbound Proxy • DNS SRV/ A Query/NATPR Query • SIP Trunk • Early Media/Early Answer • NAT: STUN, Static/Dynamic NAT

          Network Features

          • Static/Dynamic IP • PPPoE • DHCP Client • IPv4/IPv6 • TCP, UDP, TFTP, FTP, ARP, RARP, Ping, NTP, SNTP, HTTP/HTTPS, DNS • Ping / Tracert • DHCP Option 66, 120, 121

          Maintenance

          • • SNMP v1/v2/v3 • TR069 • Auto Provisioning • Web/Telnet • Configuration Backup/Restore • Firmware Upgrade via Web • CDR • Syslog • Network Capture • NTP/Daylight Saving Time • IVR local Maintenance • Cloud-based Management

          Power

          • 12W

          Environmental

          • Operating Temperature: 0 ℃ ~ 45 ℃ Storage Temperature: -20 ℃ ~80 ℃ • Humidity: 10%-90% Non-Condensing

          Physical

          • Dimension: 242*152*40mm (LxWxH), Unit Weight- 1 kg

          Compliance

          • Compliance: CE, FCC

          Understanding Our Returns and Refunds Policy

          Easy Returns for Your Convenience

          At our company, we believe that shopping should be hassle-free. This is why we have made our returns and refunds process as easy as possible. If you receive a product that doesn’t meet your expectations or is defective, you can return it within 30 days for a full refund. Our team is always here to assist you, so you don’t have to worry about complicated steps when returning an item.

          Refund Process Made Simple

          Once we receive your returned item, we initiate the refund process immediately. Typically, refunds are processed within 5-7 business days. However, there might be variations due to your bank's policies. We understand that getting your money back promptly is essential, which is why we prioritize quick refunds. Because of this efficiency, customers can trust that their satisfaction is our highest priority.

          Customer Support for Returns and Refunds

          If you have questions about our returns and refunds, our customer support team is always ready to help. You can reach out via email or phone for assistance with your return. We want you to feel confident when making a purchase, and knowing that we value customer support makes the process smoother. So, don’t hesitate to contact us if you need clarification or help!