Dinstar DAG1000-8O 8*FXO Gateway (DAG1000-8O)
Dinstar DAG1000-8O 8*FXO Gateway (DAG1000-8O)
The DAG1000-8O FXO Analog VoIP Gateway is a type of access gateway offering seamless connectivity between IP-based telephony networks and legacy telephones (POTS) and PBX systems. The analog gateway has 8 FXO ports and is used to connect to analog PBX or the PSTN lines of telecom carriers. With the standard SIP protocol, it's compatible with leading IMS/NGN platforms and SIP-based IP Phone systems. It provides low-cost and easy-to-use VoIP solutions for small and medium businesses, call centers, SOHO, remote offices as well as enterprises with multiple branches.
Dinstar DAG1000-8O Key Features
- Cost effective gateway with 4/8 FXO ports
- Fax over IP (T.38 and Pass-Through)
- Support IPv4 and IPv6•TR069 and SNMP
- Multiple codecs: G.711A/U,G.723.1,G.729A/B etc.
- Fully compatible with leading IMS/NGN, SIP based IP telephony system
Key Features
- 8 FXO ports, 1 WAN, 3 LAN
- Support SIP, IMS
- T.38 Fax
- Flexible routing & Dial plan
- Interoperable with leading softswitches, IP PBXs and SIP servers
- Embedded Operation System
- Market-proven hardware design
- Carrier-grade reliability
- Main/Secondary SIP server failover
- TLS/SRTP Security
Voice Processing
- Voice Codec: G.711A/U law, G.723.1, G.729A/B
- Voice Packet Capabilities: CNG, VAD, G.168, AJB
- Programmable Gain Control
- DTMF mode: Signal/RFC2833/INBAND
Call Features
- Calling Type: Voice/ T.38/Pass-through/Modem FAX mode, Up to 14.4kbps
- IVR Voice Prompt: Private service IVR
- Telephony Features: Call waiting, Call transfer(Blind transfer, Attend Transfer , Half blind transfer), Quick pick, Call forwarding, Hotline, Call hold, DND, Voice mail, 3-way conference,Direct IP address call
Network
- Network Protocols: IP,TCP, UDP,TFTP, FTP, ARP,RARP, Ping, NTP, SNTP, Http, DNS, Trancert
- NAT Traversal: STUN, Ping, Tracert
Protocol and Standard
- Protocol: SIP V2.0 (RFC 3261,3262,3264), RTP/RTCP
- Standard: Bellcore Type 1 &2, ETSI, BT, NTT and DTMF based CID, configurable call progress tone
Configuration Management
- Auto Provisioning: TFTP, HTTP, Auto configure/upgrade, Syslog and CDR, SNMP
- Web GUI: Configuration, firmware upgrade, TCP/UDP/Current RTP/History calls statistics
Dinstar DAG1000-8O 8*FXO Gateway (DAG1000-8O)
The DAG1000-8O FXO Analog VoIP Gateway is a type of access gateway offering seamless connectivity between IP-based telephony networks and legacy telephones (POTS) and PBX systems. The analog gateway has 8 FXO ports and is used to connect to analog PBX or the PSTN lines of telecom carriers. With the standard SIP protocol, it's compatible with leading IMS/NGN platforms and SIP-based IP Phone systems. It provides low-cost and easy-to-use VoIP solutions for small and medium businesses, call centers, SOHO, remote offices as well as enterprises with multiple branches.
Dinstar DAG1000-8O Key Features
- Cost effective gateway with 4/8 FXO ports
- Fax over IP (T.38 and Pass-Through)
- Support IPv4 and IPv6•TR069 and SNMP
- Multiple codecs: G.711A/U,G.723.1,G.729A/B etc.
- Fully compatible with leading IMS/NGN, SIP based IP telephony system
Key Features
- 8 FXO ports, 1 WAN, 3 LAN
- Support SIP, IMS
- T.38 Fax
- Flexible routing & Dial plan
- Interoperable with leading softswitches, IP PBXs and SIP servers
- Embedded Operation System
- Market-proven hardware design
- Carrier-grade reliability
- Main/Secondary SIP server failover
- TLS/SRTP Security
Voice Processing
- Voice Codec: G.711A/U law, G.723.1, G.729A/B
- Voice Packet Capabilities: CNG, VAD, G.168, AJB
- Programmable Gain Control
- DTMF mode: Signal/RFC2833/INBAND
Call Features
- Calling Type: Voice/ T.38/Pass-through/Modem FAX mode, Up to 14.4kbps
- IVR Voice Prompt: Private service IVR
- Telephony Features: Call waiting, Call transfer(Blind transfer, Attend Transfer , Half blind transfer), Quick pick, Call forwarding, Hotline, Call hold, DND, Voice mail, 3-way conference,Direct IP address call
Network
- Network Protocols: IP,TCP, UDP,TFTP, FTP, ARP,RARP, Ping, NTP, SNTP, Http, DNS, Trancert
- NAT Traversal: STUN, Ping, Tracert
Protocol and Standard
- Protocol: SIP V2.0 (RFC 3261,3262,3264), RTP/RTCP
- Standard: Bellcore Type 1 &2, ETSI, BT, NTT and DTMF based CID, configurable call progress tone
Configuration Management
- Auto Provisioning: TFTP, HTTP, Auto configure/upgrade, Syslog and CDR, SNMP
- Web GUI: Configuration, firmware upgrade, TCP/UDP/Current RTP/History calls statistics
Understanding Our Returns and Refunds Policy
Easy Returns for Your Convenience
At our company, we believe that shopping should be hassle-free. This is why we have made our returns and refunds process as easy as possible. If you receive a product that doesn’t meet your expectations or is defective, you can return it within 30 days for a full refund. Our team is always here to assist you, so you don’t have to worry about complicated steps when returning an item.
Refund Process Made Simple
Once we receive your returned item, we initiate the refund process immediately. Typically, refunds are processed within 5-7 business days. However, there might be variations due to your bank's policies. We understand that getting your money back promptly is essential, which is why we prioritize quick refunds. Because of this efficiency, customers can trust that their satisfaction is our highest priority.
Customer Support for Returns and Refunds
If you have questions about our returns and refunds, our customer support team is always ready to help. You can reach out via email or phone for assistance with your return. We want you to feel confident when making a purchase, and knowing that we value customer support makes the process smoother. So, don’t hesitate to contact us if you need clarification or help!
