DrayTek VigorSwitch VSP2100-K 8+2 Port Gigabit Switch
![DrayTek VigorSwitch VSP2100-K 8+2 Port Gigabit Switch Draytek VoIP Supplies]()
![DrayTek VigorSwitch VSP2100-K 8+2 Port Gigabit Switch Draytek VoIP Supplies]()
DrayTek VigorSwitch VSP2100-K 8+2 Port Gigabit Switch
Available:In Stock
- Category:ALL PRODUCTS,Best selling products,Draytek Ethernet Routers,New products,Routers And Switches
£195.48
DrayTek VigorSwitch VSP2100-K 8+2 Port Gigabit Switch
The DrayTek VigorSwitch VSP2100-K is a high-performance, Layer 2+ Managed Ethernet switch. With 8 RJ-45 Gigabit LAN ports, it is ideal for adding network ports to a DrayTek Vigor router. The enterprise-level features allow businesses to improve network stability and security.
DrayTek VigorSwitch VSP2100-K Key Features
- 8 x RJ-45 Gigabit Ethernet Ports
- PoE+ on all RJ-45 ports
- 140-watt Power-over-Ethernet budget
- 2 x SFP Gigabit Ports for Uplink / Fibre
- Cloud Managed with VigorACS, or standalone operation
- ONVIF IP Camera Surveillance Management with Device Check
- 802.1q VLANs with Dynamic MAC-based, Voice & Surveillance VLAN
- VLAN Routing & Static Route with DHCP server / relay
- QoS for Application traffi c prioritisation802.1x RADIUS / TACACS+ Port Authentication with Accounting
- Access Control List (ACL) Port Security
- IPv4 and IPv6 Support with DrayTek’s IP Confl ict Prevention system
- Console PortRack mountable with fittings included
DrayTek VigorSwitch VSP2100-K Technical Specifications
Physical Interfaces:
- 8 RJ-45 Ethernet Ports – 10/100/1000Mbps
- 2 SFP Ports – 1000Mbps
- Console Port (RJ-45 physical, RS-232 electrical)
- Factory Reset Button
PoE Specification (VigorSwitch P2100 only)
- 8 Power over Ethernet LAN ports - PoE PSE Mode A
- IEEE 802.3af PoE & 802.3at PoE+ (High Power) compliant
- 140 Watts Total Power Budget for PoE
- Up to 30 watts per port
- Auto Detection of Powered Device (PD) and Consumption Levels
- Per Port PoE Status LED Indicators
- Alert LED and Mail Alert for high PoE Usage
- Port Power Consumption Monitoring via Web Interface & CLI
- Circuit Protection to Prevent Power Interference between Ports
- PoE PD Monitoring & Maintenance Features (per port)
- Scheduling
-PoE PD Priority
- Restart PoE PD if not responding to ping
- Restart PoE IP Camera if not providing camera output
VLAN:
- 802.1q Tag-based VLAN
- Port-based and MAC-based VLANs
- QinQ (Basic)
- GVRP – General VLAN Registration Protocol
- Up to 256 VLANs (out of 4096 VLAN IDs)
- 802.1v Protocol-Based VLAN
- Voice VLAN (OUI Mode)
- Surveillance VLAN (OUI Mode)
- Protocol VLAN
- MAC-based VLAN
- Management VLAN
- Port Isolation
QoS
- Support 8 priority queues
- Port-Based rate control (Ingress & Egress)
- Priority queue schedule (WRR or Strict Priority)
- Rate Limit
- Class of Service
- 802.1p CoS
- DSCP
- CoS-DSCP
- IP Precedence ToS
Network Security
- IP Source Guard with ARP inspection
- Storm Control (Broadcast, Unknown Multicast, Unknown Unicast)
- DoS Attack protection
- AAA Authentication
- MAC Authentication
- Protected Port / Port Isolation
- Static Port Security
- Dynamic ARP Inspection
- DHCP Snooping with Option 82
- Loop Detection & Prevention
- Access Control Lists (ACL)
- Up to 512 ACL Entries
- Source and destination MAC
- VLAN ID
- IPv4/v6 address
- Protocol
- TCP/UDP port
Spanning Tree
- Spanning Tree Protocol (STP)
- Rapid Spanning Tree Protocol (RSTP)
- Multiple Spanning Tree Protocol (MSTP)
Link Aggretation
- Combine multiple ports to increase bandwidth
- 8 Aggregation Groups
- Up to 8 ports in each group
- LACP or Static setup
- Supports traffi c load balancing
Networking Performance
- Switching Capacity: 20Gbps
- Forwarding Rate: 14.88Mpps (64 bytes)
- Jumbo Frames up to 9KB
- Packet Buff er size: 4.1Mbit
Multicast
- Up to 256 multicast groups
- Multicast Group Filtering / Throttling
- IGMP Snooping V2/V3 (BISS)
- IGMP V2/V3 Querier
- Multicast VLAN registration
- MLD Snooping V1/V2
- Immediate Leave
- Report Suppression
- IGMP/MLD Querier
AAA (Authentication, Authorisation, Accounting)
- RADIUS / TACACS+ Authentication for Management
- Multiple AAA Server
- MAC / Inaccessible Authentication bypass
- RADIUS Authentication 802.1X
- Accounting
- Guest VLAN - Port based Authorisation
- 802.1X Single/Multi
- MAC-based
- Web-based - Attribute Assignment
- User Privilege
- VLAN - TACACS+ Authentication
- Port Authorisation
- Accounting
ONVIF Surveillance Management
- Discovery of ONVIF-compliant IP Cameras
- Surveillance Topology
- Real-Time Video Streaming
- ONVIF Device Maintenance
- Device Information
- Network Settings Configuration
- Time Settings
- Reboot
- Reset to Factory Default Settings
- Ping Check with Mail Alert on disconnection
Management:
- Central Management
- VigorACS
- VigorConnect
- Vigor Router Switch Management (requires router firmware support) - IPv4 & IPv6 Dual-Stack
- LLDP(802.1ab) + MED
- Web User Interface (HTTP or HTTPS)
- Firmware Upgrade/Backup by HTTP/HTTPS
- HTTP (Non-TLS) can be disabled for increased security
- Configuration Backup/Restore
- Factory Default
- System Reboot
- Command Line Interface (CLI) via SSH/Telnet
- Console Port (RJ45) for CLI management
- OpenVPN Client with Certificate-based auth
- SNMP v1, v2c, v3 (with Generic Traps)
- RMON Groups 1, 2, 3, 9 (History, Statistics, Alarms, Events)
- SNTP (Simple Network Time Protocol)
Diagnostics:
- Port Status & Usage display
- CPU/RAM Usage display
- MAC Address Table
- Device Check
- Syslog
- Mail Alert
- Port Status
- Port Speed Change
- System Restart
- Device Check
- IP Conflict
- ONVIF IP Camera Snapshot - Port Mirroring
- Ping Diagnostics
- Port-based Cable Test
Layer 3 networking features
- tatic Route
- VLAN Routing
- DHCP Server (from firmware 2.6.8)
IPv4 features
- DHCP Client
- DNS Client
- DHCP Server (from firmware 2.6.8)
- Up to 8 subnets
- Option 82, 66, 67
- DHCP Relay
- DHCP Snooping
- DHCP IP Source Guard
IPv6 Features
- Auto Configuration
- Static IPv6 Address & Prefix Length
- Static IPv6 Default Gateway
- IPv6 Neighbour Discovery (ND)
- IPv6 Duplicate Address Detection
- ICMPv6
- DHCPv6 Client
General IEEE Standards Compliance
- 802.3af PoE
- 802.3at PoE+
- 802.3 10Base-T
- 802.3u 100Base-T
- 802.3ab 1000Base-T
- 802.3x Flow Control
- 802.3 Auto-Negotiation
- 802.1q Tag-based VLAN
- 802.1p Class of Service
- 802.1d STP
- 802.1w RSTP
- 802.1s MSTP
- 802.3ad LACP
- 802.1ad QinQ
- 802.1x Port Access Control
- 802.1AB LLDP
- 802.3az EEE
Operating Requirements
- Power Input Requirements: 100-240VAC
- Power supply: Internal
- Maximum Input Power Consumption
- VigorSwitch G2100: 18 Watts
- VigorSwitch P2100: 164.3 Watts - Cooling: Passively cooled
- Operating Temperature: 0 °C to 50 °C
- Storage Temperature: -20 °C to 70 °C
- Operating Humidity: 5% to 90% RH (non-condensing)
Physical Specifications:
- Rack mountable: 1U
- Dimensions:
- VigorSwitch G2100: 270 x 181 x 44 mm (W x D x H)
- VigorSwitch P2100: 319 x 208 x 44 mm (W x D x H) - Weight:
- VigorSwitch G2100: 1.78 kg (3lb)
- VigorSwitch P2100: 2.61kg (5lb)
Box Contents:
- VigorSwitch P2100 Network Switch
- UK IEC13 Power Cable
- 1U Rack Mount Fittings
- Quick Start Guide
DrayTek VigorSwitch VSP2100-K 8+2 Port Gigabit Switch
The DrayTek VigorSwitch VSP2100-K is a high-performance, Layer 2+ Managed Ethernet switch. With 8 RJ-45 Gigabit LAN ports, it is ideal for adding network ports to a DrayTek Vigor router. The enterprise-level features allow businesses to improve network stability and security.
DrayTek VigorSwitch VSP2100-K Key Features
- 8 x RJ-45 Gigabit Ethernet Ports
- PoE+ on all RJ-45 ports
- 140-watt Power-over-Ethernet budget
- 2 x SFP Gigabit Ports for Uplink / Fibre
- Cloud Managed with VigorACS, or standalone operation
- ONVIF IP Camera Surveillance Management with Device Check
- 802.1q VLANs with Dynamic MAC-based, Voice & Surveillance VLAN
- VLAN Routing & Static Route with DHCP server / relay
- QoS for Application traffi c prioritisation802.1x RADIUS / TACACS+ Port Authentication with Accounting
- Access Control List (ACL) Port Security
- IPv4 and IPv6 Support with DrayTek’s IP Confl ict Prevention system
- Console PortRack mountable with fittings included
Physical Interfaces:
- 8 RJ-45 Ethernet Ports – 10/100/1000Mbps
- 2 SFP Ports – 1000Mbps
- Console Port (RJ-45 physical, RS-232 electrical)
- Factory Reset Button
PoE Specification (VigorSwitch P2100 only)
- 8 Power over Ethernet LAN ports - PoE PSE Mode A
- IEEE 802.3af PoE & 802.3at PoE+ (High Power) compliant
- 140 Watts Total Power Budget for PoE
- Up to 30 watts per port
- Auto Detection of Powered Device (PD) and Consumption Levels
- Per Port PoE Status LED Indicators
- Alert LED and Mail Alert for high PoE Usage
- Port Power Consumption Monitoring via Web Interface & CLI
- Circuit Protection to Prevent Power Interference between Ports
- PoE PD Monitoring & Maintenance Features (per port)
- Scheduling
-PoE PD Priority
- Restart PoE PD if not responding to ping
- Restart PoE IP Camera if not providing camera output
VLAN:
- 802.1q Tag-based VLAN
- Port-based and MAC-based VLANs
- QinQ (Basic)
- GVRP – General VLAN Registration Protocol
- Up to 256 VLANs (out of 4096 VLAN IDs)
- 802.1v Protocol-Based VLAN
- Voice VLAN (OUI Mode)
- Surveillance VLAN (OUI Mode)
- Protocol VLAN
- MAC-based VLAN
- Management VLAN
- Port Isolation
QoS
- Support 8 priority queues
- Port-Based rate control (Ingress & Egress)
- Priority queue schedule (WRR or Strict Priority)
- Rate Limit
- Class of Service
- 802.1p CoS
- DSCP
- CoS-DSCP
- IP Precedence ToS
Network Security
- IP Source Guard with ARP inspection
- Storm Control (Broadcast, Unknown Multicast, Unknown Unicast)
- DoS Attack protection
- AAA Authentication
- MAC Authentication
- Protected Port / Port Isolation
- Static Port Security
- Dynamic ARP Inspection
- DHCP Snooping with Option 82
- Loop Detection & Prevention
- Access Control Lists (ACL)
- Up to 512 ACL Entries
- Source and destination MAC
- VLAN ID
- IPv4/v6 address
- Protocol
- TCP/UDP port
Spanning Tree
- Spanning Tree Protocol (STP)
- Rapid Spanning Tree Protocol (RSTP)
- Multiple Spanning Tree Protocol (MSTP)
Link Aggretation
- Combine multiple ports to increase bandwidth
- 8 Aggregation Groups
- Up to 8 ports in each group
- LACP or Static setup
- Supports traffi c load balancing
Networking Performance
- Switching Capacity: 20Gbps
- Forwarding Rate: 14.88Mpps (64 bytes)
- Jumbo Frames up to 9KB
- Packet Buff er size: 4.1Mbit
Multicast
- Up to 256 multicast groups
- Multicast Group Filtering / Throttling
- IGMP Snooping V2/V3 (BISS)
- IGMP V2/V3 Querier
- Multicast VLAN registration
- MLD Snooping V1/V2
- Immediate Leave
- Report Suppression
- IGMP/MLD Querier
AAA (Authentication, Authorisation, Accounting)
- RADIUS / TACACS+ Authentication for Management
- Multiple AAA Server
- MAC / Inaccessible Authentication bypass
- RADIUS Authentication 802.1X
- Accounting
- Guest VLAN - Port based Authorisation
- 802.1X Single/Multi
- MAC-based
- Web-based - Attribute Assignment
- User Privilege
- VLAN - TACACS+ Authentication
- Port Authorisation
- Accounting
ONVIF Surveillance Management
- Discovery of ONVIF-compliant IP Cameras
- Surveillance Topology
- Real-Time Video Streaming
- ONVIF Device Maintenance
- Device Information
- Network Settings Configuration
- Time Settings
- Reboot
- Reset to Factory Default Settings
- Ping Check with Mail Alert on disconnection
Management:
- Central Management
- VigorACS
- VigorConnect
- Vigor Router Switch Management (requires router firmware support) - IPv4 & IPv6 Dual-Stack
- LLDP(802.1ab) + MED
- Web User Interface (HTTP or HTTPS)
- Firmware Upgrade/Backup by HTTP/HTTPS
- HTTP (Non-TLS) can be disabled for increased security
- Configuration Backup/Restore
- Factory Default
- System Reboot
- Command Line Interface (CLI) via SSH/Telnet
- Console Port (RJ45) for CLI management
- OpenVPN Client with Certificate-based auth
- SNMP v1, v2c, v3 (with Generic Traps)
- RMON Groups 1, 2, 3, 9 (History, Statistics, Alarms, Events)
- SNTP (Simple Network Time Protocol)
Diagnostics:
- Port Status & Usage display
- CPU/RAM Usage display
- MAC Address Table
- Device Check
- Syslog
- Mail Alert
- Port Status
- Port Speed Change
- System Restart
- Device Check
- IP Conflict
- ONVIF IP Camera Snapshot - Port Mirroring
- Ping Diagnostics
- Port-based Cable Test
Layer 3 networking features
- tatic Route
- VLAN Routing
- DHCP Server (from firmware 2.6.8)
IPv4 features
- DHCP Client
- DNS Client
- DHCP Server (from firmware 2.6.8)
- Up to 8 subnets
- Option 82, 66, 67
- DHCP Relay
- DHCP Snooping
- DHCP IP Source Guard
- Auto Configuration
- Static IPv6 Address & Prefix Length
- Static IPv6 Default Gateway
- IPv6 Neighbour Discovery (ND)
- IPv6 Duplicate Address Detection
- ICMPv6
- DHCPv6 Client
- 802.3af PoE
- 802.3at PoE+
- 802.3 10Base-T
- 802.3u 100Base-T
- 802.3ab 1000Base-T
- 802.3x Flow Control
- 802.3 Auto-Negotiation
- 802.1q Tag-based VLAN
- 802.1p Class of Service
- 802.1d STP
- 802.1w RSTP
- 802.1s MSTP
- 802.3ad LACP
- 802.1ad QinQ
- 802.1x Port Access Control
- 802.1AB LLDP
- 802.3az EEE
Operating Requirements
- Power Input Requirements: 100-240VAC
- Power supply: Internal
- Maximum Input Power Consumption
- VigorSwitch G2100: 18 Watts
- VigorSwitch P2100: 164.3 Watts - Cooling: Passively cooled
- Operating Temperature: 0 °C to 50 °C
- Storage Temperature: -20 °C to 70 °C
- Operating Humidity: 5% to 90% RH (non-condensing)
Physical Specifications:
- Rack mountable: 1U
- Dimensions:
- VigorSwitch G2100: 270 x 181 x 44 mm (W x D x H)
- VigorSwitch P2100: 319 x 208 x 44 mm (W x D x H) - Weight:
- VigorSwitch G2100: 1.78 kg (3lb)
- VigorSwitch P2100: 2.61kg (5lb)
Box Contents:
- VigorSwitch P2100 Network Switch
- UK IEC13 Power Cable
- 1U Rack Mount Fittings
- Quick Start Guide
Understanding Our Returns and Refunds Policy
Easy Returns for Your Convenience
At our company, we believe that shopping should be hassle-free. This is why we have made our returns and refunds process as easy as possible. If you receive a product that doesn’t meet your expectations or is defective, you can return it within 30 days for a full refund. Our team is always here to assist you, so you don’t have to worry about complicated steps when returning an item.
Refund Process Made Simple
Once we receive your returned item, we initiate the refund process immediately. Typically, refunds are processed within 5-7 business days. However, there might be variations due to your bank's policies. We understand that getting your money back promptly is essential, which is why we prioritize quick refunds. Because of this efficiency, customers can trust that their satisfaction is our highest priority.
Customer Support for Returns and Refunds
If you have questions about our returns and refunds, our customer support team is always ready to help. You can reach out via email or phone for assistance with your return. We want you to feel confident when making a purchase, and knowing that we value customer support makes the process smoother. So, don’t hesitate to contact us if you need clarification or help!
